7500-XXX
Upper media exit roll assembly removal
1.
Open the finisher front door assembly.
2.
Remove the rear upper cover. See
3.
Remove the top cover. See
4.
Remove the drive motor (exit). See
page
4-190.
5.
Disconnect the connector from the sensor (upper media exit) (A).
6.
Release the harness from the clamps.
4-182
Options Service Manual
"Rear upper cover removal" on page
"Top cover removal" on page
"Drive motor (exit) assembly and belt (exit) removal" on
4-101.
4-96.
A
Connecto
Left