Carriage Lift Belt Left Removal - Lexmark X850e Service Manual

Carriage lift belt left removal

1.
Remove the rear upper cover. See
2.
Remove the finisher front door assembly. See
3.
Move the slip clutch gear 24T (A) toward the rear to disengage the stacker bin (B).
4.
Move the stacker bin (B) down to its lowest position after being disengaged.
Note: Make sure the stacker bin is at its lowest position before continuing.
"Rear upper cover removal" on page
"Finisher front door assembly removal" on page
B
4-101.
A
Rear
Repair information
7500-XXX
4-104.
4-107