Size Sensing - Lexmark X850e Service Manual

SIZE SENSING

This setting controls whether the printer automatically registers the size of paper installed in an input source
equipped with size sensing hardware.
Input source
Multipurpose feeder (integrated MPF)
Tray 1 (integrated 500-sheet drawer)
Tray 2 (integrated 500-sheet drawer)
Tray 3 (integrated TTM 850-sheet drawer)
Tray 4 (integrated TTM 1150-sheet drawer)
Tray 3 (optional 2TM 500-sheet drawer)
Tray 4 (optional 2TM 500-sheet drawer)
Tray 5 (optional HCF 2000-sheet drawer)
To change the value of this setting:
1.
Touch SIZE SENSING from the Configuration Menu. The screen displays each size sensing equipped
input source and its current Size Sensing value.
SIZE SENSING
Tray 1 Sensing
Tray 2 Sensing
Tray 3 Sensing
Tray 4 Sensing
?
Submit
2.
Touch or
3.
Touch Back to cancel and return to the Configuration Menu.
4.
Touch Submit to save the change.
By turning this setting to Auto, every input option equipped with size sensing hardware automatically registers
what size paper it contains. When this setting is turned Off, the printer ignores the size detected by the hardware
and treats the input source as a non-sensing source. The media size can be set by the operator panel or the
data stream.
to scroll through the setting's other possible values.
Size sensing
Length
✓
✓
✓
✓
Auto
Auto
Auto
Auto
Back
7500-XXX
Width
✓
✓
✓
✓
✓
✓
✓
✓
3-39
Diagnostic aids