Buffer Pinch Guide Assembly Removal - Lexmark X850e Service Manual

Buffer pinch guide assembly removal

1.
Remove the finisher front door assembly. See
2.
Remove the rear upper cover. See
3.
Remove the stapler unit frame. See
4.
Lower the buffer pinch guide assembly (A) as far as it will go.
5.
Move the buffer pinch guide assembly (A) to the right to remove the two bosses from the holes in the
finisher.
"Finisher front door assembly removal" on page
"Rear upper cover removal" on page
"Stapler unit frame removal" on page
Hole in rear frame
Boss
A
7500-XXX
4-104.
4-101.
4-131.
4-173
Repair information