Selecting And Quick Editing Presets - E-Mu PX-7 Owner's Manual

Selecting and Quick
Editing Presets
Bank
0
103
To Audition a Preset
Select Preset View mode by pressing the preset button in the Mode/
1.
View section immediately below the LCD.
Select a preset by turning the data entry control while the cursor is
2.
anywhere on the lower line. The preset number field (shown above) is
the normal position of the cursor and pressing the Enter button will
return the cursor to this position.
Press the Audition button on the front panel. The Audition LED will
3.
illuminate and a short riff will play the selected preset.
Continue to select and audition presets.
4.
Press the Audition button again to turn Audition mode off. The LED
5.
will extinguish.
Play the rubber keypads.
6.
Be sure to check out the transposition buttons and touchstrip.
7.
The first thing you'll do with the PX-7 is select and play the factory
provided presets. PX-7 comes standard with 8 banks containing 128 presets
each. See "Preset Screen" on page 42.
Channel Volume
Number Setting
C01A
0
103
Blinking Preset
Cursor Number
The first four banks are User locations that can be overwritten and used to
store your own presets. The presets that come stored in the User presets are
duplicated in banks 0-3 of the "DRUM" ROM bank, so feel free to overwrite
them with your own presets. You won't be losing anything.

Selecting and Quick Editing Presets

MSB:019 LSB:0
kit: DanceCommand
Initial Initial
Pan Arpeggiator
Setting Setting
V127 P01 A:off
R
kit: DanceCommand
Bank Preset
Number
Category
Instant Gratification
DRUM
Preset
Location
User
Preset
Name
PX-7 Owners Manual 23