Setting Meter (Time Signature) - E-Mu PX-7 Owner's Manual

Setting Meter
(Time Signature)
To Set the Event Sources for a Song
Select the Song you wish to edit in Song mode.
1.
Press the Song Edit button.
2.
Scroll to the Event Source screen shown below using the data entry
3.
control.
EVENT SOURCE
tempo:
Select: Song Events Only, First Pattern Only, All Patterns, or Song &
4.
Patterns for each event type.
Press the Song Edit button again to exit the module.
5.
PX-7 allows you to set almost any conceivable time signature. The
numerator (indicating number of beats in a measure) can be set from 1 to
99. The denominator (indicating the rhythmic value of each beat) can be
set to 1, 2, 4, 8, 16, 32, or 64. The time signature can be changed at any
time before or after recording.
The meter setting affects the bar:beat display, the pattern length,
metronome accent, and the grid recording display.
For more information about Time Signatures, see page 339.
To Set the Time Signature
Select the song in which you want to record in Song mode.
1.
Press the Song Edit button. The Song Edit menu screen displays the
2.
menu page most recently selected since powering up PX-7.
Scroll to the Meter screen using the data entry control. The meter
3.
setting will probably show the 04/4 default time signature.
METER
04 / 4
Press the right cursor button once to move the cursor underneath the
4.
numerator field.
Set the time signature numerator value using the data entry control.
5.
Press the right cursor button again to move the cursor underneath the
6.
denominator field.
Set the time signature denominator value using the data entry
7.
control.
Press the Song Edit button again to exit Song Edit mode.
8.
song events only
METRONOME
off
Sequencer
Song Edit Menu
VALUE
1/8
PX-7 Owners Manual 111