E-Mu PX-7 Owner's Manual page 32

O O O O
PX-7's buttons have
been designed so that you can
slide your fingers across them to
quickly mute and unmute tracks.
20 E-MU Systems
patterns. The new pattern will begin playing when the current pattern
has finished.
T
01 STOP
CurPat: 002
Select a new pattern, press Stop, then press Play to change patterns
5.
without waiting for the current pattern to end.
Track Muting
Press the Track Enable/Mute buttons to bring tracks in and out. Every
6.
factory pattern has from eight to sixteen tracks. The LED in each button
illuminates when a track is enabled (unmuted). The diagram below
shows the default factory track assignments.
Track Mixing
Press the Mix button (located beneath the LCD) while a pattern is
7.
playing. The Channel Volume display screen appears, showing the
volumes of all 32 channels.
CH VOLS
01A:125
Now press the Controller Function Select button (located above the
8.
controller knobs) twice so that Volume is selected.
The sixteen controller knobs now function as volume controls for MIDI
9.
channels 01A-16A.
• While we're on the subject of Tracks and Channels, it might be a good
time to mention that in all the factory patterns, a given track will control
the MIDI channel of the same number. That means Track 1 will play the
preset on channel 01A, track 2 will play channel 02A and so on up to 16.
Feel free to turn the knobs and remix the pattern. The LEDs next to the
knobs flash to indicate activity on that channel/track.
Change the Sound
Adjust your remix so that track (the bass) is the most prominent
10.
instrument in the mix.
Press the Preset View button and select Track using the Track/Channel
11.
buttons to the left of the LCD.
Now repeatedly press the Controller Function Select button until
12.
"Quick Edit" is selected.
Now the knobs control the bass sound. You know what to do.
13.
Ln:08 Bar:01 .1
0
NextPat: 022
Instant Gratification
Playing Patterns & Songs
0