Scale/Shift Duration - E-Mu PX-7 Owner's Manual

Scale/Shift Duration

O O O O
Tip: To set all notes to a
particular value, set Scale to 0%,
(this zeros the value) then set
Shift to the desired duration.
78 E-MU Systems
SELECT TRACKS AND RANGE
Key Range: C-2
Select the Track(s) you wish to Scale or Shift using the Track Enable/
6.
Mute buttons.
Select a key range for filtering. The default setting is all keys. Keys can
7.
be selected from the keyboard when the cursor is on the key fields.
Press Enter to scale/shift the note start times. Press any other menu
8.
button to Cancel the operation.
This filter allows you to either scale (multiply by a value) or shift (add a
value to) the note durations in the selected tracks. The Scale function is
performed before the Shift value is added.
Scale - Multiplies all note durations by a percentage from 0% to 125%.
Scaling by 100% would leave all note durations untouched. Scal-
ing by 50% would cut all note durations in half.
Shift - Adds or subtracts a specific note duration in quarter notes and
ticks to note-on events in the selected tracks.
To Scale or Shift Note Duration
Select the pattern you wish to edit.
1.
Select the Track(s) you wish to Scale or Shift using the Track Enable/
2.
Mute buttons.
Press the Pattern Edit button.
3.
Scroll to the Scale/Shift Note Duration screen shown below using the
4.
data entry control.
SCALE/SHIFT NOTE DURATION
Scale: 87%
Select the amount of note duration scaling or shift (offset). The
5.
Home/Enter LED will be flashing once the cursor is moved to the lower
line of the display.
to:G8
Low Key High Key
Shift: +00.000
Quarter Notes
Sequencer
Pattern Edit Menu
Ticks