Selecting And Quick Editing Presets - E-Mu Proteus 1000 Operation Manual

Selecting and Quick
Editing Presets
18 E-MU Systems
BankSel 0:00
2
058
To Audition a Preset
Select a preset by turning the data entry control while the cursor is
1.
anywhere on the lower line. The preset number field (shown above) is
the normal position of the cursor and pressing the Enter button will
return the cursor to this position.
Press the Audition button on the front panel. The Audition LED will
2.
illuminate and a short riff will play the selected preset.
Continue to select and audition presets.
3.
Press the Audition button again to turn Audition mode off. The LED
4.
will extinguish.
The first thing you'll do with the Proteus 1000 is select and play the factory
provided presets. Proteus 1000 comes standard with 12 banks containing
128 presets each.
Channel
Number
C01
0
000
Preset
Number
The first four banks are USER locations that can be overwritten and used to
store your own presets. The presets that come stored in the USER presets are
duplicated in banks 4-7 of the "CMPSR" ROM bank, so feel free to overwrite
them with your own presets. You won't be losing anything.
The ROM Card identifier is shown in the top right of the display. The preset
is identified in the bottom line of the main screen (the screen that appears
when you first power up the unit).
32:2
syn: Big Planet
Initial Initial
Volume Pan
Setting Setting
Vol127 Pan01
bas: Interference
Bank Preset
Number Category
Instant Gratification
User
Preset
Location
User
R
Preset
Name
Setup