Rechannelize Input - E-Mu PX-7 Owner's Manual

Rechannelize Input

This feature makes it easier to record to the internal sequencer using an
external keyboard. Rechannelize Input changes the channel of incoming
MIDI data according to the settings in the Channel Assignment screen.
To record multiple tracks, you simply change the track number and preset.
You don't have to change the channel number of your external MIDI
controller.
Rechannelize Input can be set to Off, Always or On Record. When set to
On Record, the input will only be rechannelized when the Record LED is
illuminated (Record or Record-Pause mode). This allows normal MIDI
channel routing except when recording, when the channel data will be
changed to match the current track.
RECHANNELIZE INPUT
To Track Dest: always
Using Rechannelize Input to Record from a MIDI Keyboard:
Select an empty pattern.
1.
Set Rechannelize Input to Always.
2.
Select a preset for Channel 1 (C01A) from the Preset View screen.
3.
(Note that your MIDI keyboard always plays the preset assigned to the
channel shown in the display.)
Turn Preset View Off to show the pattern screen again.
4.
Press Record, then set the Pattern Length, Quantize & Metronome.
5.
Press Play to begin recording.
6.
Press Stop when finished. (Press Stop twice to Return to Zero.)
7.
Select a preset for Channel 2 (C02A) from the Preset View screen.
8.
Notice that the keyboard now plays the new preset.
Press Record, then Play to begin recording.
9.
Continue to record tracks.
10.
MIDI Menu
Rechannelize Input
PX-7 Owners Manual 161