Audition Riff Selection; Play Solo Layers - E-Mu PX-7 Owner's Manual

Audition Riff
Selection
O O O O
Listening to the Riffs is a
quick way to learn the sounds in
PX-7. If a preset has hidden
tricks or controllers, these will be
shown off in the Riff.

Play Solo Layers

242 E-MU Systems
A Riff is a short pre-recorded musical phrase which can be anything from a
single note to a full 16-track sequence. This function allows you to assign a
Riff to a Preset. The Preset Riff will be used when the front panel Audition
button is pressed.
The Riffs themselves cannot be modified.
AUDITION SELECTION
Plays:KEY-MiddleC
When constructing multilayer sounds it is often useful to turn off one or
more of the layers so you can hear what you're doing! This feature allows
you to temporarily solo individual layers or listen to them in any combi-
nation. This screen differs from the other Preset Edit screens in that it is
NOT saved with the preset. The values reset each time you exit the Preset
Edit menu.
Solo is activated by setting any layer to On (On = the layer is being Soloed).
Any layers set to On will play and any layers set to Off will be muted. If all
layers are set to Off, then Solo mode ends and all layers play normally.
When you exit the Preset Edit menu, all layers play normally.
PLAY SOLO LAYERS
1: off 2: off 3: off
Preset Edit Menu

Audition Riff Selection

4: off