Copy Track To Clipboard - E-Mu PX-7 Owner's Manual

Copy Track to
Clipboard
An individual track or a section of a track can be copied and held on a
digital "clipboard" so that it can be pasted into another track or pattern.
This function makes a digital copy of the selected track and places it on the
clipboard, where it will be held until it is replaced with another cut or copy
operation, or the power to PX-7 is turned off.
To Copy a Track
Select the pattern you wish to edit.
1.
Press the Pattern Edit button.
2.
Scroll to the Copy Track to Clipboard screen shown below using the
3.
data entry control.

COPY TRACK TO CLIPBOARD

Track: 1
Select the track to be copied. The Home/Enter LED will be flashing
4.
once the cursor is moved to the lower line of the display.
Select the Start Bar and the Length (in bars) to be copied.
5.
Press Enter to copy the track. Press any other menu button to Cancel
6.
the operation.
Bar:06 Len:07
Sequencer
Pattern Edit Menu
PX-7 Owners Manual 87