Using The Repeat Button For Live Performance; Mute Hold - E-Mu PX-7 Owner's Manual

Using the Repeat
Button for Live
Performance
_ _ _ _
Using the Repeat button,
even in play mode, causes the
current pattern to be dirtied
(asterisk showing). Although
nothing is actually recorded in
the current pattern, this could
cause an unsaved pattern to be
wiped out.

Mute Hold

The repeat button is functional during playback. The quantization value,
accessible from the record or record paused screen determines the repeat
rate. Note that this is NOT the quantization setting located in the pattern
and song edit menus. Repeat does not function when the sequencer is
stopped or paused or when the current track is muted. In addition, any
screen or mode that overrides the repeat button such as list edit precludes
using realtime repeat.
To Use the Repeat Button during Pattern or Song Playback
From song or pattern mode press the Record button. The following
1.
screen appears:
T
01 REC
Quan: 16
Select the desired quantization (repeat) value.
2.
Press Stop to exit record mode.
3.
Select the desired pattern or song.
4.
Press Play.
5.
Press the Repeat button illuminating the LED.
6.
• Play the pads or keyboard. Notes will repeat at the selected
quantization rate.
Track mutes can be held from pattern to pattern by holding the Tap button
while pressing Enter so select the next pattern. This live performance
feature allows you to keep the song at the same level of complexity when
changing patterns.
While the
Pattern is
Playing:
To Use the Mute Hold feature while a Pattern is Playing
Play a pattern.
1.
Change the track mutes as desired.
2.
Select a new pattern using the data entry control.
3.
Hold the Tap button while pressing Enter.
4.
The track mute settings of the previous pattern will remain in effect.
5.
Ln:04 Bar: 01:1
Met: off CntIn: 0
Hold TAP & hit ENTER
to hold the Mute settings.
Sequencer
Live Performance Features
PX-7 Owners Manual 127