Knob Preset Quick-Edit; Real-Time Controller Assignment - E-Mu PX-7 Owner's Manual

O O O O
Turning a knob while in
this screen automatically selects
that knob for programming!
Knob Preset
Quick-Edit
Real-time Controller
Assignment
To Program the Programmable Knobs
Press the Controllers button. Its LED will illuminate.
1.
Turn the data entry control to select the "Programmable Knobs" screen.
2.
K1
Knob #
Ctrl: 22
Use the left/right cursor controls to select the fields.
3.
Select the MIDI Continuous Controller number, the MIDI channel, and
4.
Internal/External/Both/Sequencer for each of the 16 knobs.
Save the Multisetup if you want to save these settings. See page 147.
5.
"Quick-Edit" changes the initial controller setting in the preset whenever
you move a Control Knob. This parameter selects whether or not the front
panel Controller Knobs are used to Quick-Edit the currently selected preset.
See "Real-time Controller Knobs" on page 35 in the Operations chapter for
more details.
KNOBS PRESET QUICK-EDIT
disabled
Use these three pages to assign sixteen real-time control sources. Each MIDI
Controller is assigned a letter (A - P). The front panel Controller Knobs and
sixteen MIDI controller numbers share the A-P controller routings. These
screens let you select which MIDI real-time controllers numbers will be
received (from 1 to 31 and from 64 to 95) and which controller numbers
will be transmitted over MIDI if the front panel controls are turned.
The PatchCord routing and amount in the Preset Edit menu determine
what effect the controller has on each preset. Real-time controllers are
shown in the PatchCord menu as MIDI A through MIDI P.
The Real-time Controller assignment also specifies which controller
numbers are transmitted when the "Knobs MIDI Out" is enabled (see
"Knobs Output MIDI" on page 162).
PROGRAMMABLE KNOBS
Ch:01A
CC# MIDI Chan
Controllers Menu

Knob Preset Quick-Edit

Ext
Int/Ext/Both/Seq
PX-7 Owners Manual 141