Power Down Sequence - E-Mu PX-7 Owner's Manual

Power Down
Sequence
Rack Mounting PX-7
board. In a pinch, the effect returns can be used to sum additional instru-
ments into the main outputs. It's like having an extra line mixer when you
need more inputs!
Output Section
L Bus
R Bus
Tip Tip
Ring Ring
R L
SUB 2
You can use the Sub 1 and Sub 2 jacks as effect returns to the Main Outputs.
Note that the Effects Processors are only routed to the Main Outputs.
To avoid accidentally turning off the power while playing PX-7, the front
panel power switch incorporates a five second "fail-safe" feature when
powering down. Once the power down sequence has begun, you have five
seconds to press the power switch again and stop PX-7 from turning off.
****
Press On / Off to Abort . . .
PX-7 can be rack mounted if you so desire. You'll need (6) rack spaces to fit
PX-7 into your rack. The black end caps remove easily with three screws to
reduce the width to 19 inches. Rack mounting ears are available from your
E-MU dealer (Model 7770).
Tip Tip
Ring
R
SUB 1
POWERING DOWN : 4

Power Down Sequence

Effects
Processors
Ring
L R
MAINS
PX-7 Owners Manual 17
Setup
L