Metronome; Recording A Pattern - E-Mu PX-7 Owner's Manual

Metronome

Recording a Pattern

   
For these instructions,
make sure Keyboard/Knob
Channel in the Controllers menu
is set to "Basic Channel".
The metronome is a timing aid when recording or playing back patterns
which produces an accented click on the first beat of each measure and a
softer click on other beats. This setting is NOT saved with the pattern.
To Set the Metronome
Go into Record mode by pressing the Record button.
1.
Scroll to the Metronome screen using the data entry control.
2.
Move the cursor underneath the Metronome field and set it to On, Off
3.
or Rec using the data entry control. Set to On, the metronome plays
during recording and playback. Set to Rec, the metronome only plays
while recording.
The metronome value is set in the Pattern Edit menu. See page 72.
4.
To Record a new Pattern
Press the Pattern mode button. The screen shown below appears.
1.
T
01 STOP
0
000 Start of IT
Select a Blank pattern to begin recording using the data entry control.
2.
Press the Record button. The screen shown below appears.
3.
Track Number
T
01 REC
Quan: 8
Auto-Correct
Set the Pattern Length and Input Quantize value. For more infor-
4.
mation on Input Quantize see page 53.
Set the number of count-in bars if you wish.
5.
Select a Track number. The default value is Track one. This is fine for
6.
the first track.
Press the Preset View button. The preset screen shown below appears.
7.
C01A
3
050 kit:80's Tones
Select a Preset for your first track.
8.
Ln: 08 Bar: 01. 1
Pattern Length
Ln: 08 Bar: 01. 1
Met: on
Metronome on/off
V127 P00 A:P
Sequencer
Pattern Mode
Current Position
Cnt: 0
Count-in Bars
User
PX-7 Owners Manual 57