Controllers Menu - E-Mu PX-7 Owner's Manual

Controllers Menu

The Controllers menu contains functions related to the keypad, knobs or
trigger buttons of PX-7. For example, the programmable knobs and triggers
are programmed in this menu. All Controllers menu data is saved with the
Multisetup. See page 146 for more information about Multisetups.
To enable the Controllers menu
Press the Controllers button, lighting the LED. The Controllers Menu
screen displays the menu page most recently selected since powering up
PX-7. The cursor appears below the first character of the screen heading on
line one.
To select a new screen
Press the Home/Enter button or press the Cursor button repeatedly until
the cursor is below the screen title heading. Rotate the data entry control to
select another screen.
To modify a parameter
Press either Cursor button repeatedly (or hold down the right cursor button
while turning the data entry control) until the cursor is below the desired
parameter value. Rotate the data entry control to change the value.
To return to the previously selected Mode/View screen
Press the Controllers button, turning off the LED.
PX-7 Owners Manual 133