Triggers Pattern Select - E-Mu PX-7 Owner's Manual

Triggers Pattern
Select
You can select one of 16 patterns using the Trigger buttons. Pressing one of
the trigger buttons in pattern select mode causes the programmed pattern
to be armed. The armed trigger button LED will flash. The armed pattern
will begin playing at the next loop. The trigger button LED will be solidly
illuminated while the selected pattern is playing.
This feature can be put to good use in combination with the "Restart
Pattern Fire Key" described on page 53.
Trigger buttons are programmed by choosing the Select Patterns option in
the "Trigger Buttons Function" mode in the Controllers menu.
TRIGGER BUTTONS FUNCTION
Select Patterns
This screen in the Controllers menu allows you to select a pattern for each
of the 16 buttons.
One set of assignments (16 triggers to 16 patterns) will be saved per
multisetup.
To Program the Trigger Buttons to Select Patterns:
Press the Controllers button. Its LED will illuminate.
1.
Turn the data entry control to select the Triggers Pattern Select screen.
2.
Use the left/right cursor controls to select fields and select a pattern for
3.
each of the 16 trigger buttons.
Save the Multisetup if you wish to save these settings.
4.
To Select Patterns Using the Trigger Buttons:
Press the Controllers button. Its LED will illuminate.
1.
Turn the data entry control to select the Trigger Buttons Function
2.
screen.
Move the cursor to the lower line, set the selection to Select Patterns.
3.
Press Enter.
4.
Press the Mode button so that the Triggers LED illuminates.
5.
Press the Trigger Buttons to select patterns.
6.
Controllers Menu

Triggers Pattern Select

PX-7 Owners Manual 139