E-Mu PX-7 Owner's Manual page 221

Press the Preset Edit button to access the Preset Edit menu.
1.
Go to the Instrument screen and select Instruments for Layers 1
2.
through 4.
Press Enter, then use the data entry control to advance to the Real-time
3.
Crossfade page.
L1
RT: LO
000
L2
RT: LO
032
L3
RT: LO
064
L4
RT: LO
096
Define the High and Low range of each Layer as shown above.
4.
Press Home/Enter and use the data entry control to advance to the
5.
PatchCord page. Select Layer 1.
Select XfdRnd as the modulation source and RTXfade as the desti-
6.
nation. Set the Cord Amount to +100.
Repeat step 6 for the remaining three layers.
7.
Defining the Real-time Crossfade Range
FADE HIGH
000 031
FADE HIGH
000 063
FADE HIGH
000 095
FADE HIGH
000 127
PX-7 Owners Manual 209
Preset Edit Menu
FADE
000
FADE
000
FADE
000
FADE
000