Apply Clipboard Settings - E-Mu PX-7 Owner's Manual

   
You will not hear the
results of the Paste operation
until the sequence cycles around.
(Hint: Press RTZ)
Apply Clipboard
Settings
Select the track where you want the clipboard data to be pasted. The
4.
Home/Enter LED will be flashing once the cursor is moved to the lower
line of the display.
Select the bar where the clipboard contents will be pasted.
5.
Select the number of times you want the clipboard data pasted.
6.
Press Enter to paste the data. Press any other menu button to Cancel
7.
the operation.
To Bounce Tracks
Copy the first track you wish to bounce.
1.
Paste the track to the desired destination track.
2.
Repeat steps 1 & 2 for the other tracks you wish to bounce down.
3.
Press the Pattern Edit button and scroll to the Channel Assign screen.
4.
Set the Track containing all your bounced tracks to MultiA.
5.
(or MultiB if the original tracks were recorded using the "B" channels.)
This function copies the volume, pan, preset, arp status, and send bus
assignments (Global Mix Output) from the clipboard to the selected track. If
the clipboard contains multichannel data, the settings will be applied for
each channel.
This feature is useful when you copy and paste a track and want the preset
settings to be copied and pasted as well. This feature can also be used if you
want to record a new track with the same preset settings on another track.
C10A
0
83 hit: Krunchy
MIX OUTPUT
channel
Apply Clipboard Settings pastes the data indicated by the arrows.
This setup data is saved when you save the pattern.
To Apply Clipboard Preset Settings:
Copy a track to the clipboard.
1.
Paste the clipboard data to another track.
2.
Scroll to the Apply Clipboard Settings screen.
3.
V090 P00 A:P
10A: Send2->main
Sequencer
Pattern Edit Menu
User
PX-7 Owners Manual 89