Cut Track To Clipboard - E-Mu PX-7 Owner's Manual

Cut Track to
Clipboard
O O O O
Cut track can be used as
a way to erase a track.
O O O O
Tracks can be freely cut,
copied or pasted between songs
and patterns.
86 E-MU Systems
An individual track or a section of a track can be cut or copied and held on
a digital "clipboard" so that it can be pasted into another track or pattern.
This function cuts or removes a track (or section of a track) from the pattern
and places it on the clipboard, where it will be held until it is replaced with
another cut or copy operation, or the power to PX-7 is turned off.
Cutting a section from a track will leave a blank space in the track.
The cut section is placed on the clipboard leaving a blank space in the
To Cut a Track
Select the pattern you wish to edit.
1.
Press the Pattern Edit button.
2.
Scroll to the Cut Track to Clipboard screen shown below using the
3.
data entry control.

CUT TRACK TO CLIPBOARD

Track: 1
Select the track to be cut. The Home/Enter LED will be flashing once
4.
the cursor is moved to the lower line of the display.
Select the Start Bar and the Length (in bars) to be cut.
5.
Press Enter to cut the track. Press any other menu button to Cancel the
6.
operation.
track where the data was cut out.
Bar:04 Len:07
Sequencer
Pattern Edit Menu