Realtime Song Recording - E-Mu PX-7 Owner's Manual

   
The 16 tracks of a song
can be assigned to either the A
or B channels using the "Song
Channel Assign" function on
page 120.
Realtime Song
Recording
O O O O
To Quick-Select a MIDI
Channel:
1. Press and hold Tap.
2. Press the Track Enable/Mute
button corresponding to the
MIDI channel you wish to select.
The following parameters are also saved with the Song. Set these param-
eters, then save the song again if you wish. The "Event Source" option in
the Song Edit menu (page 110) determines whether song or pattern events
will be used in the song.
• Initial Tempo
• Volume for 16 channels
• Pan for 16 channels
• Mix Output setup for 16 channels
• Arp channel status (off/on/preset/master) for 16 channels
• Master FX setup
• Event Source
Realtime Song Recording lays down a single track which may contain
multichannel: note, program change and controller data (but no
Realtime data will retain its recorded channel information so you can lay in
multichannel note and controller information. Multiple channel infor-
mation received over MIDI will also be recorded.
To Record a Song in Realtime mode
Press the Song mode button. The screen shown below appears.
1.
Song Tempo
(if song events selected)
:150
0
000 Start of IT
Select a Blank song to begin recording using the data entry control.
2.
Press the Record button once to select Realtime Record mode. The
3.
Realtime record LED illuminates and the screen shown below appears.
If you have already step recorded any pattern inserts, their numbers will
appear on the lower line of the display.
Set the metronome to On or Rec if you want a timing reference.
4.
Song Meter
(for metronome)
M: 04 / 4 Bar: 001 . 1
Song Name
Sequencer
Song Mode
SysEx).
Current Location
PX-7 Owners Manual 107