Power Switch
Volume Control
12VDC Lamp
Basic Operations
C01A V127 P00 A:P User
0
019 kit:Whack Kit
The PX-7 front panel contains an LCD screen, 49 buttons, and 16 real-time
controller knobs. Functions are grouped logically and the controls are
arranged for ease of use.
The front panel On/Off switch is a "Soft" power switch that can be used to
turn power on and off when the PX-7 is rack mounted. Use the AC power
switch on the rear panel if you wish to completely disconnect PX-7 from
the AC mains.
The power switch incorporates a "fail-safe" feature when powering down.
Once the power down sequence has begun, you have five seconds to press
the power switch again and stop PX-7 from turning off.
This control is the master volume control for all audio outputs. The Volume
Control does not affect any editing or user interface operations. The front
panel volume control is a digital attenuator. For maximum dynamic range,
turn this knob all the way up and control the volume from your mixer or
amplifier.
The BNC connector in the upper left corner of the PX-7 panel supplies 12
volts DC at 250 mA to power a standard mixing desk lamp. (Order E-MU
Model Number 7773 - Locking Lamp from your E-MU dealer.)
Basic Operations
PX-7 Owners Manual 29