Multichannel Track Recording - E-Mu PX-7 Owner's Manual

Multichannel Track
Recording
O O O O
The Channel Assignment
screen is a MIDI rechannelizer.
The Multi A or B assignments
allow multiple MIDI channels on
a track.
To Assign Tracks to MIDI Channels
Select the pattern you wish to edit.
1.
Press the Pattern Edit button.
2.
Scroll to the Select Track Changes screen shown below using the data
3.
entry control.
T
01 CHANNEL ASSIGN
Channel: 01A:
Select the desired track(s).
4.
Select the desired channel for the track.
5.
Select the desired destination for the track.
6.
Press the Pattern Edit button again to exit the module.
7.
Each of PX-7's 16 tracks can contain multichannel MIDI data. Because
tracks can be routed internally or externally on either of the two MIDI
ports, the PX-7 sequencer can actually control up to 64 separate MIDI
channels (16 internal-A, 16 internal-B, 16 MIDI port-A, 16 MIDI port-B).
Once a track is enabled for multichannel recording you can record into it
using the rubber keypads or external MIDI data.
To Setup a Track for Multichannel Recording
Select the pattern you wish to record.
1.
Playback Setup (steps 2-7 set up the track for multi-channel play back)
Press the Pattern Edit button.
2.
Scroll to the Select Track Changes screen shown below using the data
3.
entry control.
T
01 CHANNEL ASSIGN
Channel: 01A:
Select the desired track.
4.
Set the track to MultiA or MultiB.
5.
Select the desired destination for the track (internal, external or both).
6.
Press the Pattern Edit button again to exit the module.
7.
Pattern Edit Menu
Dest:both
Dest:both
PX-7 Owners Manual 93
Sequencer