Defining The Filter Envelope; Auxiliary Envelope - E-Mu PX-7 Owner's Manual

   
See the Programming
Basics section of this manual for
detailed information about how
the Envelopes work.
   
The default PatchCord
settings connect the Filter
Envelope to Filter Frequency but
the envelope can be routed to
any real-time control destination
using a PatchCord.

Auxiliary Envelope

L1
FILTER ENVELOPE
Repeat: off
Move the cursor underneath the on/off field, then turn the data entry
3.
control clockwise so that Repeat is On.
Defining the Filter Envelope
The Filter Envelope controls the filter frequency of the layer over time. The
Envelope has six stages to the contour: Attack 1, Attack 2, Decay 1, Decay 2,
Release 1 and Release 2. When a key is pressed, the Envelope goes through
the first four stages. If the key continues to be held, the envelope holds at
the Decay 2 level. When the key is released, the envelope immediately
jumps to the Release 1 stage, then the Release 2 stage finally ending at the
Release 2 level.
+100
0
time
-100
Key Down
The Auxiliary Envelope is a supplementary general purpose envelope that
can be routed to any real-time control destination in the PatchCords. It is
identical to the filter envelope generator. See "Filter Envelope" on page 222
for full details.
Preset Edit Menu
Auxiliary Envelope
Sustain
Key Released
PX-7 Owners Manual 223