Arp/Riff Midi Out; Midi Song Start - E-Mu PX-7 Owner's Manual

Command station 128-voice synth multi track sequencer
Table of Contents

Advertisement

Arp/Riff MIDI Out

   
The arpeggiators are
contained within the preset
which is why a "dummy" preset
must be used.

MIDI Song Start

Use the Key Range parameter to set the keyboard range for the arpeggiator.
Notes inside the range will arpeggiate while notes outside the specified
range will not arpeggiate. Use the Extensions parameters to exceed the
upper boundary of the Key Range (see the information about Extensions
beginning on page 249).
MASTER ARPEGGIATOR
Key Range
Move the cursor under the first key and use the data entry control to define
the lowest key to be arpeggiated. Move the cursor under the second key
value and use the data entry control to define the highest key to be arpeg-
giated.
This screen allows you to set whether or not arpeggiator and/or riff data is
transmitted out the MIDI ports for all channels with arps on. The options
are: don't transmit, transmit arps, transmit riff, or transmit both.
ARP / RIFF MIDI OUT
transmit arps
To Transmit Arpeggiator Data to another MIDI Device:
Set Arp/Riff MIDI Out (above) to Transmit Arps or Transmit Both.
1.
Select an arp: preset.
2.
If you don't want the internal PX-7 preset to sound, create a "dummy"
3.
preset with no instruments selected and the arpeggiator turned on.
Name and Save this preset.
Connect MIDI Out to MIDI In on your external MIDI synth. (Channels
4.
1A-16A go out the MIDI A port. Channels 1B-16B go out the MIDI B port.)
Go into the MIDI menu and turn "Rechannelize Input" Off. This
5.
prevents double notes from sounding on the sustained pads.
Name and Save the Multisetup if you want to keep the setup.
6.
The arpeggiator, beats and the sequencer are all synchronized to the same
clock (internal or MIDI) Although the arp or beats notes are synced to the
clock, they may still be out of sync with the downbeat or first note of the
sequence. This feature allows the arps, beats or both, to "resync" to the first
beat of the sequence when the sequencer is started. This feature also works
when receiving MIDI Song Start from an external source.
Arpeggiator/Beats Menu
Master Arpeggiator Parameters
C-2->G8
PX-7 Owners Manual 253

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents