The Conductor Track; Conductor Track Screens - E-Mu PX-7 Owner's Manual

   
If you want to insert
internal program changes
choose Internal and set the
channel number or Multi.

The Conductor Track

100 E-MU Systems
Set the Track to Transmit Externally
Press Home/Enter and scroll to the "Channel Assign" screen.
11.
T
06 CHANNEL ASSIGN
Channel: MultiA
In order for the program change to be transmitted, the track must be
12.
assigned to an External destination (or Both).
You must also set the channel to the same channel as the program
13.
change or to Multi. Use MultiA or MultiB if you want to send program
changes on multiple MIDI channels. (MultiA goes out port A; MultiB goes
out port B.)
Save the Pattern.
14.
The conductor track (track 0) allows you to insert tempo and meter changes
anywhere in the pattern. Select the track below track 1 and the first screen
shown below will appear.

Conductor Track Screens

T
CT EVENT
C01 tempo:
T
CT EVENT
C01 meter:
To Insert a Tempo Change into the Conductor Track
Select the pattern you wish to edit.
1.
Press the Pattern Edit button.
2.
Press the (-) Track/Channel button until "CT" appears in the track
3.
field.
Press the Enter button as prompted by the display to begin editing.
4.
Move the cursor to the lower line of the display and select tempo.
5.
Dest: Ext
<-> 003.01.000
138 bpm
<-> 003.01.000
04/4
Sequencer
Pattern Edit Menu