Saving A Preset; Saving A Song - E-Mu PX-7 Owner's Manual

Saving a Preset

   
Each time you change a
preset parameter, an asterisk
appears in the preset name and
the Save/Copy button LED
illuminates reminding you to
save your work.

Saving a Song

286 E-MU Systems
Any time you make a change to a preset, either using the Preset Edit menu
or by changing the Controller Knobs in Quick Edit mode, you must save
the preset in order for the change to become permanent. When you save a
preset it erases any existing preset information in that location. Make sure
that the destination location does not contain preset information you want
to keep.
SAVE PRESET to
1
020 Destination Preset
To Save a Preset
Press the Save/Copy menu button.
1.
Move the cursor to the bottom line on the display.
2.
Select the new preset location using the data entry control.
3.
Press the Home/Enter button.
4.
Changes made to the current song are not made permanent until the song
is saved.
When a song (or pattern) has been edited and needs to be saved, an asterisk
(*) appears in the display. The asterisk and your edits remain on the edited
song even if you change songs. Edits are only erased by saving the song,
editing another song, invoking the "Revert To Saved" feature (page 124), or
turning the unit off.
SAVE SONG to
004
To Save a Song
Press the Save/Copy menu button.
1.
Move the cursor to the bottom line of the display.
2.
Use the data entry control to select the new location for the song. The
3.
Enter LED will be flashing.
Press Enter when you have made your selection. The display will
4.
momentarily flash "Saving Song", and the song will be saved.
:Blank
Save/Copy Menu
Saving a Preset
User
30%