Paste Clipboard To Track - E-Mu PX-7 Owner's Manual

Paste Clipboard to
Track
O O O O
Tracks can be freely cut,
copied and pasted between
songs and patterns.
   
The Track Number
cannot be changed in a Song
since there is only one track.
_ _ _ _
You will not hear the
results of the Paste operation
until the sequence cycles around.
(Hint: Press RTZ)
Once a track or track section has been cut or copied to the clipboard, it can
it can be pasted into another location on the song track from 1 to 99 times.
The Paste operation Merges the clipboard data with the data on the desti-
nation track at the selected bar position. This feature allows you to "bounce
down" multiple tracks to a single multichannel track. See below.
Pattern Play events are NOT affected by the Paste operation. Pattern
play events must be edited using Step Record.
Song Track
Specified
Bar
1
Total Extension = 6 bars
To Paste the Clipboard into a Track
Select the pattern you wish to edit.
1.
Press the Pattern Edit button.
2.
Scroll to the Paste Clipboard to Track screen shown below using the
3.
data entry control.

PASTE CLIPBOARD TO TRACK

Track: 1
Select the bar where the clipboard contents will be pasted.
4.
Select the number of times you want the clipboard data pasted.
5.
Press Enter to paste the data. Press any other menu button to Cancel
6.
the operation.
Specified
Paste
Bar
Paste x3
2 3
At Bar:06
Sequencer
Song Edit Menu
Clipboard
2-bars
Clipboard
X:1
PX-7 Owners Manual 119