Paste Clipboard To Track - E-Mu PX-7 Owner's Manual

Paste Clipboard to
Track
_ _ _ _
Preset settings are NOT
pasted to the destination track.
(Preset Settings = volume, pan,
preset, arp status, and send bus
assignments.)
Use Apply Clipboard Settings,
(page 89) to paste the preset
settings.
O O O O
Tracks can be freely cut,
copied or pasted between songs
and patterns.
88 E-MU Systems
Once a track (or a section of a track) has been cut or copied to the
"clipboard", it can be pasted into another track or pattern from 1 to 99
times. The Paste operation Merges the clipboard data with the data on the
destination track. It adds the new information to the existing data with the
start of the data in the clipboard placed at the selected bar position.
Because of the data merging feature, the Paste operation can be used to
"bounce down" multiple tracks to a single multichannel track. See below.
Specified
Bar
Total Extension = 6 bars
To Paste the Clipboard into a Track
Press the Pattern Edit button.
1.
Cut or Copy data to the clipboard. See pages 86 and 87.
2.
Scroll to the Paste Clipboard to Track screen shown below using the
3.
data entry control.

PASTE CLIPBOARD TO TRACK

Track: 1
Destination
Track
Specified
Paste
Bar
Tracks
Paste x3
1 2
At Bar:06
Start
Location
Pattern Edit Menu
Clipboard
2-bars
Clipboard
3
X:3
Number
of Pastes
Sequencer