NEC NEAX 2000 IPS Installation Manual page 80

• WHEN MAKING A SWITCH SETTING ON A CIRCUIT CARD
CIRCUIT
CARD
• WHEN CARRYING A CIRCUIT CARD
CIRCUIT
CARD
The mark shown below is attached to the sheet for the work in which circuit cards are handled. When
engaging in such work, the installer must be careful not to cause damage by static electricity.
Static Electricity Guard
WEAR A WRIST STRAP AND PERFORM
THE WORK ON A GROUNDED
CONDUCTIVE WORK SURFACE.
CONDUCTIVE
POLYETHYLENE
BAG
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
– 64 –
CHAPTER 2 INSTALLATION
PRECAUTIONS
WHEN CARRYING A CIRCUIT
CARD AROUND, KEEP THE
CARD IN A CONDUCTIVE
POLYETHYLENE BAG.
NWA-008841-001 Rev.5.0
90ch2001.fm