NEC NEAX 2000 IPS Installation Manual page 590

Lamp Indications
LAMP
COLOR
NAME
PWR Green
ALM Red
BUSY Green
NOTE 1
L1LNK Green
L1ACT Green
L1SPD Green
L2LNK Green
L2ACT Green
Switch Settings
When the operating power is being supplied to this circuit card, do not plug/unplug this circuit
card into/from its mounting slot.
SWITCH NAME
PWRSW
(Toggle SW)
NOTE 2
ON : Operating power is ON.
OFF: Operating power is OFF.
Remains lit when a trouble occurs.
Remain lit while writing/reading the data to/from the flash memory.
Remains lit while LAN1 port is connected to the network.
Flashes while LAN1 port is sending or receiving the data.
Remains lit while LAN1 port is operating at 100 Mbps.
Remains lit while LAN2 port is connected to the network.
Flashes while LAN2 port is sending or receiving the data.
SWITCH SETTING
NUMBER POSITION
UP
DOWN
FUNCTION
CAUTION
FUNCTION
Operating power is OFF
Operating power is ON
– 574 –
PN-RTA (RTA)
CHECK
Continued on next page
NWA-008841-001 Rev.5.0
90ch3004.fm