NEC NEAX 2000 IPS Installation Manual page 56

EQUIPMENT FUNCTIONAL
NAME
PZ-24IPLA 24DSP
PZ-8PFTB PFT
PZ-VM00/ VM00
PZ-VM00-M
PZ-VM10-M VM10
PZ-VM01 VM01
PZ-VM02 VM02
[For North
America/Aus-
tralia]
Line/Trunk Card Name and Function
NAME
24-channel DSP Card for 8-channel IP-PAD Card
Provides Packet Assembly/Disassembly to accommodate Legacy
Line/Trunk Interface. And Provides voice compression DSP control
functions such as voice compression control, DTMF relay same as
IP-PAD (PN-8IPLA) card.
Used to expand the IP-PAD channel up to 32-channels.
8-line Power Failure Transfer Card
To be mounted in PFT slot of PIM.
One card per PIM.
4-port Voice Mail Card (NEAXMail AD-8)
One card per system.
Number of ports : 4 ports (Up to 8 ports when PZ-VM01 is
Occupies three physical slots width per card.
To be mounted in LT00 slot of PIM.
4-port Voice Mail Card (NEAXMail AD-8)
One card per system.
Number of ports : 4 ports (Up to 8 ports when PZ-VM01 is
Occupies three physical slots width per card.
To be mounted in LT00 slot of PIM.
4-port Voice Mail Extension Card
To be mounted on PZ-VM00/VM00-M.
This card consists of a digital signal processor for port interface
(4 ports), central processor unit for controlling various data, hard
disk unit to read/write the application software, and an internal
modem (14.4 Kbps) for remote maintenance. Moreover, mounted
into the LT00 slot (for CPU card) of the PIM0. One card per PBX
is available.
CHAPTER 1 GENERAL INFORMATION
FUNCTION
mounted)
mounted)
– 40 –
EQUIPMENT NAME AND FUNCTION
Continued on next page
NWA-008841-001 Rev.5.0
90ch1001.fm
JULY/1/2006