NEC NEAX 2000 IPS Installation Manual page 249

<Ringing>
This item specifies on/off setting of the ringing.
STEP1: Display Configuration Menu P4.
STEP2: Press the numeric key 2 (RINGING).
STEP3: Press the desired numeric key. An asterisk (*) shows the selected number.
1. Ringing is available.
2. Ringing is not available.
STEP4: Press the SRC key. The display returns to Configuration Menu.
STEP5: Press the Answer key to update the configuration data.
When canceling update, press the Release key.
When specifying other item, press the DEST key.
When returning previous item, press the SRC key.
[CONFIG MENU P4] VER x
1: 2ND RINGING
2: RINGING
3: RECEIVER VOLUME SET
[RINGING]
* 1: ENABLE
2: DISABLE
[CONFIG MENU P4] VER x
1: 2ND RINGING
2: RINGING
3: RECEIVER VOLUME SET
Page 221
SRC: prev page
DEST: next page
Release: exit
Answer: update
SRC: menu
SRC: prev page
DEST: next page
Release: exit
Answer: update
– 233 –
SN716 DESKCON (DLC)
Default setting:
"1:ENABLE"
Page 225
NWA-008841-001 Rev.5.0
90ch2002.fm