NEC NEAX 2000 IPS Installation Manual page 110

CHAPTER 2 INSTALLATION
INSTALLATION OF MAIN EQUIPMENT
• Connection of Modules
NOTE: The FRONT STOPPER, BUILD PLATES, and screws are attached to the Module.
(1) Insert the BUILD PLATES (R)/(L) into the slits of the SIDE FRAME, then slide them backward
and lock them.
(2) Place the FRONT STOPPER on the Module, then fix it with three screws.
Connection of BUILD PLATE
BUILD PLATE (R)
BUILD PLATE (L)
SIDE FRAME
Continued on next page
– 94 –
NWA-008841-001 Rev.5.0
90ch2001.fm