NEC NEAX 2000 IPS Installation Manual page 523

LAMP
COLOR
NAME
B00 Red
Switch Settings
SWITCH NAME
DL0
(Rotary SW)
0
NOTE
DL1
(Rotary SW)
0
NOTE
The figure in the SWITCH NAME column and the position of
umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and
, the setting of the switch varies with the system concerned.
NOTE: Set the groove on the switch to the desired position.
B channel status
ON
OFF
Flash (60 IPM)
SWITCH SETTING
NUMBER POSITION
0
0-F
1-F
0
0-F
1-F
FUNCTION
: B0 channel of the No. 0 circuit is in use.
: B0 channel of the No. 0 circuit is in idle.
: ZT is not connected to the No. 0 circuit.
ZT is in make-busy status.
FUNCTION
For normal operation
Not used
For normal operation
Not used
– 507 –
PN-2CSIA (CSI)
in the SETTING POSITION col-
NWA-008841-001 Rev.5.0
CHECK
90ch3004.fm