(3)
Fix the CARD STOPPER according to the following procedure.
STEP1: After mounting all circuit cards slide the CARD STOPPER to the left.
STEP2: Tighten the screws of the CARD STOPPER as shown below.
NOTE:
When sliding the PIM CARD STOPPER, loosen all of the screws securing the PIM CARD
STOPPER and the PZ-M542/PZ-M557 card (the screws need not to be removed).
Installation of the CARD STOPPER
CIRCUIT CARD
CIRCUIT CARD
SLIDE THE CARD
SCREW
STOPPER TO THE LEFT.
– 276 –
CHAPTER 2 INSTALLATION
MOUNTING CIRCUIT CARDS
CARD
STOPPER
SCREW
CARD
STOPPER
NWA-008841-001 Rev.5.0
90ch2002.fm