• Connection of 19"RACK BRACKET (B)
(1) Place the BASE PLATE on the 19"RACK BRACKET (B).
(2) Secure the BASE PLATE with four washer and nuts.
(3) Mount the BASE to the BASE PLATE.
(See
"Connection of BASE and BASE
(4) Mount the Module to the BASE.
(See
"Connection of Module and
NOTE:
Nuts and washers are attached to the 19
19"RACK BRACKET (B)
PLATE".
BASE".
Connection of 19"RACK BRACKET (B)
BASE PLATE
– 108 –
INSTALLATION OF MAIN EQUIPMENT
Page
91)
Page
92)
"
RACK BRACKET (B).
CHAPTER 2 INSTALLATION
NUT
WASHER
NWA-008841-001 Rev.5.0
90ch2001.fm