NEC NEAX 2000 IPS Installation Manual page 242

(e) Configuration Data Assignment of Each Item
<Headset/Handset>
This item specifies an optional handset/headset connected to the HAND H/S0 connector.
NOTE: When using HAND H/S1 connector, this data assignment is not required.
STEP1: Display Configuration Menu P1.
STEP2: Press the numeric key 1 (HEADSET/HANDSET).
STEP3: Press the desired numeric key. An asterisk (*) shows the selected number.
1. Headset is connected to the HAND H/S0 connector.
2. Handset is connected to the HAND H/S0 connector.
STEP4: Press the SRC key. The display returns to Configuration Menu.
STEP5: Press the Answer key to update the configuration data.
When canceling update, press the Release key.
When specifying other item, press the DEST key.
[CONFIG MENU P1] VER x
1: HEADSET/HANDSET
2: HEADSET TYPE
3: MUTE
[HEADSET/HANDSET]
* 1: HEADSET
2: HANDSET
[CONFIG MENU P1] VER x
1: HEADSET/HANDSET
2: HEADSET TYPE
3: MUTE
Page 221
SRC: prev page
DEST: next page
Release: exit
Answer: update
SRC: menu
SRC: prev page
DEST: next page
Release: exit
Answer: update
– 226 –
SN716 DESKCON (DLC)
Default setting:
"1:HEADSET"
Page 225
NWA-008841-001 Rev.5.0
90ch2002.fm