NEC NEAX 2000 IPS Installation Manual page 235

(6) Connection of Recording Equipment
The following equipment is required for using recording function:
• Tape Recorder with MIC and Remote Connections
• Cross Connect Wire
• 8-Core Modular Block (RJ45)
• 8-Core Modular Cable
As shown in the following figure, connect cross connect wire to MIC Jack and Remote Jack, then
connect other end of wire to 8-core modular block. And connect one end of 8-core modular cable to
DESKCON REC connector, connect the other end to 8-core block.
DESK CONSOLE
(Bottom view)
SN716 DESKCON
1
2
3
4
5
6
7
8
Cable Connection for Recording Equipment
8-Core
Modular Cable
REC (8-Core)
8-core
Modular
Page 220
Cable
MODULAR
BLOCK (RJ45)
1P
1P
MODULAR
BLOCK (RJ45)
– 219 –
SN716 DESKCON (DLC)
TAPE RECORDER
MIC JACK
REMOTE
JACK
Cross Connect Wire
TAPE RECORDER
MIC Jack
Remote Jack
Cross
Connect
Wire
NWA-008841-001 Rev.5.0
90ch2002.fm