NEC NEAX 2000 IPS Installation Manual page 251

<Power Control>
This item specifies the power control of the SN716 DESKCON in night mode.
STEP1: Display Configuration Menu P5.
STEP2: Press the numeric key 3 (POWER CONTROL).
STEP3: Press the desired numeric key. An asterisk (*) shows the selected number.
1. Power control is not effective.
2. The LCD back light is put out. When pressing an any key, the LCD back light is put on, the light
is put out again after 30 seconds.
STEP4: Press the SRC key. The display returns to Configuration Menu.
STEP5: Press the Answer key to update the configuration data.
When canceling update, press the Release key.
When specifying other item, press the DEST key.
When returning previous item, press the SRC key.
[CONFIG MENU P5] VER x
1: FUNCTION KEY SWAP
2: RINGER VOLUME IN PB
3: POWER CONTROL
[POWER CONTROL]
* 1: NORMAL
2: LOW POWER (PUT OUT LCD)
[CONFIG MENU P5] VER x
1: FUNCTION KEY SWAP
2: RINGER VOLUME IN PB
3: POWER CONTROL
Page 221
SRC: prev page
DEST: next page
Release: exit
Answer: update
SRC: menu
SRC: prev page
DEST: next page
Release: exit
Answer: update
– 235 –
SN716 DESKCON (DLC)
Default setting:
"1:NORMAL"
Page 225
NWA-008841-001 Rev.5.0
90ch2002.fm