NEC NEAX 2000 IPS Installation Manual page 607

Lamp Indications
LAMP
COLOR
NAME
CPU RXD Green
Board
TXD Red
MOD Green
RI Red
HDD Red
–
BIOS Red
–
DSP BL0-7 Red
Board
SWP Red
DSP Green/
Flashing
Red/
Flashing
PL0-3 Red
Not used
Not used
Not used
Incoming call
Accessing to the HDD
Built-in hard disk is faulty
BIOS programming is in operation
DOS mode has been activated
• Remains lit when the corresponding circuit is in use.
• Flashes at 60 IPM when the corresponding circuit is in make-busy
state or the system data for this card is not assigned.
20 seconds after the MB switch is turned ON (upward) (The circuit
card can be plugged/unplugged while this pilot lamp is on.)
According to voice mail application program in use.
DSP circuit operating
– 591 –
PZ-VM00/PZ-VM00-M (VM00)/PZ-VM10-M (VM10)
FUNCTION
NWA-008841-001 Rev.5.0
90ch3004.fm
JULY/1/2006