MOUNTING FRONT COVER
NOTE:
When the system is a multiple-Module configuration, attach the FRONT COVER of those other
than bottom Module in the following procedures.
(1)
Remove two screws located on the inside of the FRONT COVER, and remove the
BRACKET.
(2)
Insert the BRACKET from under the hook of the FRONT COVER and fix the BRACKET
to the FRONT COVER with screws.
(3)
Attach the FRONT COVER in an order from top-stack PIM.
FRONT COVER
BRACKET
SCREW
– 282 –
CHAPTER 2 INSTALLATION
MOUNTING FRONT COVER
NWA-008841-001 Rev.5.0
90ch2002.fm