NEC NEAX 2000 IPS Installation Manual page 244

<Mute>
This item specifies On/Off setting of the mute function for the HAND H/S0 or H/S1 connector.
If the Mute key is pressed while the mute function is set to On, the voice at the DESKCON side
is not sent to the other party.
STEP1: Display Configuration Menu P1.
STEP2: Press the numeric key 3 (MUTE).
STEP3: Press the desired numeric key. An asterisk (*) shows the selected number.
1. Both H/S0 and H/S1 are set to On
2. Only H/S0 is set to On
3. Only H/S1 is set to On
STEP4: Press the SRC key. The display returns to Configuration Menu.
STEP5: Press the Answer key to update the configuration data.
When canceling update, press the Release key.
When specifying other item, press the DEST key.
[CONFIG MENU P1] VER x
1: HEADSET/HANDSET
2: HEADSET TYPE
3: MUTE
[MUTE]
* 1: H/S0 ON, H/S1 ON
2: H/S0 ON, H/S1OFF
3: H/S0 OFF, H/S1 ON
[CONFIG MENU P1] VER x
1: HEADSET/HANDSET
2: HEADSET TYPE
3: MUTE
Page 221
SRC: prev page
DEST: next page
Release: exit
Answer: update
SRC: menu
SRC: prev page
DEST: next page
Release: exit
Answer: update
– 228 –
SN716 DESKCON (DLC)
Default setting:
"1:H/S0 ON, H/S1 ON"
Page 225
NWA-008841-001 Rev.5.0
90ch2002.fm