NEC NEAX 2000 IPS Installation Manual page 461

Internet protocol server installation procedure manual
Hide thumbs Also See for NEAX 2000 IPS:
Table of Contents

Advertisement

Lamp Indications
• PN-IPTB
LAMP
COLOR
NAME
RUN
Green
BUSY
Red
SUBOPE3
Green
SUBOPE2
Green
SUBOPE1
Green
SUBOPE0
Green
L3
L2
Green
L1
Green
LYR
Green
• PZ-M567
LAMP
COLOR
NAME
LINK
Green
TXRX
Green
COL
Green
100M
Green
Flashes at 120 IPM while this card is operating normally.
ON:
At least one line is busy.
OFF: All lines are idle.
Remains lit when Card No.3 of 4VCT is operating.
Remains lit when Card No.2 of 4VCT is operating.
Remains lit when Card No.1 of 4VCT is operating.
Remains lit when Card No.0 of 4VCT is operating.
Not used
Remains lit when this card successfully has been registered at the
H.323 gatekeeper. Before the L2 lights, the led is winking.
Remains lit while the line can be used.
Remains lit when IP network is ready to use.
ON:
Connected to the IP network.
OFF: Not connected to the IP network.
Remains lit when sending or receiving IP data.
Remains lit when detecting IP data collision.
ON:
Ethernet is operating at 100 Mbps.
OFF: Ethernet is operating at 10 Mbps.
– 445 –
FUNCTION
FUNCTION
PN-IPTB (IPT)
NWA-008841-001 Rev.5.0
90ch3003.fm

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents