NEC NEAX 2000 IPS Installation Manual page 68

(4) Mounting Conditions of Each Card
CARD NAME
PN-PW00
PN-BRTA
PN-2BRTC
PN-2BRTK
PN-4BRTA-A
PN-24CCTA
PN-30CCTA
PN-24DTA-C
PN-30DTC-C
PN-24PRTA
PN-30PRTA
PN-DTA
PN-DTB
PZ-M542
PZ-M557
PN-4BRTA-A
PN-8ETIA
[For North America/
Australia]
MOUNTING CONDITIONS
No circuit card can be mounted in the adjoining left side slot because
one card occupies two physical slots width.
Mount at least one card in PIM0 to receive source clock signals.
Mount the PZ-M542/PZ-M557 card into any LTC connector of PIM
BWB.
Maximum of two cards can be mounted per PIM as follows:
LTC0 and LTC2
LTC0 and LTC3
LTC1 and LTC3
Maximum of six cards can be mounted per PIM, maximum of 24 cards
per system. For the same number of slots as PN-4BRTA-A cards, only
line/trunk cards can be mounted in any slot of LT00-LT11 slots of each
PIM.
No circuit card can be mounted in the adjoining left side slot because
one card occupies two physical slots width.
– 52 –
CHAPTER 1 GENERAL INFORMATION
MOUNTING CONDITIONS OF CIRCUIT CARDS
NWA-008841-001 Rev.5.0
90ch1001.fm
JULY/15/2007