Assembly - Yamaha VMX12H Supplementary Service Manual

FRONTFORK
3. Inspect:
Damper rod
Wear/Damage
Contamination
with compressed air.
4. Inspect:
Oil lock piece
O-ring (cap bolt)
Wear/Damage

ASSEMBLY

Reverse the "DISASSEMBLY" procedure.
Note the following points.
NOTE:
In front fork reassembly, be sure to use
following new parts.
*
Piston metal
*
Slide metal
Oil seal
Dust seal
Make sure that all components are clean
before reassembly.
1.lnstall:
Damper rod
the damper rod to slide
Allow
the inner fork tube until it protrudes from the
bottom, being careful not to damage the
inner fork tube.
-11-
Replace.
Blow out all oil passages
Replace.
down
slowly