Yamaha VMX12H Supplementary Service Manual page 108

FRONT FORK ADJUSTMENT
2-25
8. Install:
Drain screws
9. Fill:
forks
Each Fork:
451 cm³ (15.9 Imp oz. 15.3 US oz)
Yarnaha Fork Oil 10wt or Equivalent
After filling, pump the forks slowly up and
down to distribute the oil.
10. Tighten:
bolts
Use the Front Fork Cap Socket (YM-
01 104).
bolts (steeringcrown)
Cap Bolt:
Nrn
23 (2.3
Pinch Bolts (Steering Crown):
20 Nrn (2.0
11. Adjust:
Front fork air pressure
Refer to "FRONT FORK ADJUSTMENT"
section.
FRONT FORK ADJUSTMENT
1. Elevate the front wheel by placing a suitable
stand under the engine.
NOTE:
When checking and adjusting the air pressure,
there should be no weight on the front end of
the motorcycle.
2. Adjust:
pressure
NOTE:
The air pressure of the front forks can be
adjusted to suit rider's preference, weight, and
the course condition.
17
I
14