HYDRAULIC CLUTCH
3.
Inspect:
seal
Wear
Replace.
CLUTCH REASSE M B LY
internal parts should be cleaned in new
brake fluid only.
Internal parts should be lubricated with brake
fluid when installed.
Clutch Release Reassembly
When assembling the clutch release, reverse the
disassembly procedure. Note the following
points.
1.
Install:
Clutch release assembly
Clutch hose
Clutch Release Assembly:
1 2 N m (1.2
Clutch Hose:
I
2 5 N m (2.5
Master Cylinder Reassembly
When assembling the master cylinder, reverse
the disassembly procedure. Note the following
points.
1.
Install:
Master cylinder
Clutch hose
Replace.
8.7
18
6-24