Yamaha VMX12H Supplementary Service Manual page 250

6-1 1
FRONT AND REAR BRAKE
CALIPER PAD REPLACEMENT
It is not necessary t o disassemble the brake
caliper and brake hose t o replace the brake pads.
1. Remove:
2. Remove:
Retaining clips
Retaining pins
spring
3.
Remove:
Pads
NOTE:
the pad spring if pad replacement is
required.
Replace the pads as a set if either is found to
be worn to the wear limit.
Wear Limit
0.5 mm (0.02 in)
4. Install:
in above list (steps "3
NOTE:
AND REAR BRAKE:
Install the pad spring with i t s longer tangs
facing towards the disc rotating direction.
1")